Mini Spot Welder Kit, Professional Color Screen LCD Display Mini DIY Spot Welding Machine Portable Rechargeable Spot Welding, Spot Welding Equipment

Specification: Item Type: Mini Spot Welder Battery Capacity: 1 x 3.7V lithium battery 5000mAh Product Screen: 1.8in color LCD Welding Pen Wire Thickness: 8AWG Welding Current: 6-1200A Overcurrent : 1.12KA Full Time: 2 Hours Endurance: 800-2000 Times Battery Cycle Life: 1000 Cycles Standby Current: 20uA Theoretical Standby: 2.5 Years or more Storage Temperature And Humidity: 55℃ 50% Maximum limited Charging: 5.2V 2.1A Discharge: 5V 2.4A maximum Support Welding: 0.25mm sheet, iron sheet, stainless steel Welding Time: Several milliseconds Maximum Welding Thickness: Approx. 10mm / 0.39in How to Use: Install and use directly. PackageList: 1 x Spot Welder 1 x Data Cable 2 x Welding Pen 20 x Sheet

• LCD Screen: Mini spot welder has 1.8in color LCD screen,the preheating, interval and pulse parameters of the main interface can be adjusted according to your situation.Professional color screen small mini DIY spot welding machine built in rechargeable 2 electric power lithium battery, environmental . Type C 2A input, fully charged in about 2 hours, can also be used to other devices.
• MEASURES: Portable spot welding machine has overcharge and overtemperature function, short circuit function. With a unique overheat device, automatically cut off the power when overheating occurs, and automatically shut down without any , so that you can use safer
• PARAMETERS: Mini spot welder has 6-1200A welding current,overcurrent is 1.12KA and the welding time is several milliseconds.The welding pen wire thickness is 8AWG,it supports welding 0.25mm sheet,iron sheet, stainless steel,the maximum welding thickness is about 10mm / 0.39in.
• FLEXIBLE AND PEN: The terminal of the pen is gold plated and can pass through higher currents. 8mm spot welding special copper possess ultra low , oxidation . The length of the pen is 40cm, which is flexible and convenient to use.
• WITH INDICATOR LIGHT: When the pen is connected to the sheet, the MOS tube will automatically output. Equipped with indicator lights that automatically turn off at low voltage to protect the battery